Tutorials:Import Scanned Model And Drape

Part 1 - Import

1. Download scanned model in OBJ format from here and unzip the file.
2. Select the Load Model command.
3. Change the File of type to obj files (*.obj)
4. Select the the file Scanned_Male_scale 254.obj from step 1
5. Still in the Open dialog, set the Scale to 254
6. Click Open to finish the import process.
7. This is what you should get:

Open dialog

Import scanned model

Part 2 - Drape Jeans

1. Download the ZIP file with PDS files to be draped over the model from here and unzip the file.
2. Go the PDS File menu and select Open File (Ctrl+O)
3. Select the 5 Pocket Jeans.PDS
4. From 3D Toolbar click Place Cloth (Shift+`)
5. Click Simulate Draping (')
6. This is what you should get:

Front

Back

Part 2 - Drape Shirt

1. Go the PDS File menu and select Open File (Ctrl+O)
2. Select the Woven Shirt.PDS
3. From 3D Toolbar click Place Cloth (Shift+`)
4. Click Simulate Draping (')
5. This is what you should get:

Front

Back

Related Subjects

• Import OBJ