Tutorials:Adding Parallel Pin Tucks

From OptiTexHelpEn

Jump to: navigation, search

Many times, pin tucks which are parallel to each other with a constant width are needed.

Operation

  1. Select the segment.
  2. Create Multi Pleats.
  3. Ctrl + Click on the 'Last Pleat Angle'.
  4. Insert the required number of pleats and their width.
  5. Click 'Ok'.
1. Original Piece
1. Original Piece
2. Add a Guideline on the Center Front
2. Add a Guideline on the Center Front
3. Move the guideline through the Guideline Properties
3. Move the guideline through the Guideline Properties
4. Add a point to mark the limit of the pin tucks
4. Add a point to mark the limit of the pin tucks
5. Delete All Guide Lines
5. Delete All Guide Lines
6. Select the segment
6. Select the segment
7. Create Multi Pleats
7. Create Multi Pleats
8. Click the Ctrl + Last Pleat Angle to make the pleats divided equally along the X axis
8. Click the Ctrl + Last Pleat Angle to make the pleats divided equally along the X axis
9. Preview of the pleats
9. Preview of the pleats
10. Pin tucks created
10. Pin tucks created

Related Subjects

Retrieved from "http://www.optitex.com/Help/en/index.php/Tutorials:Adding_Parallel_Pin_Tucks"
Personal tools
Marker