Tutorials:Adding A Notch On The Cut Line According To The Seam Width
From OptiTexHelpEn
When using a cutting machine, sometimes a notch is needed in order to show cutter operator, where the fabric should fold.
Operation
- Add seam to the piece.
- Select the 'Notch On Point Tool'.
- Click on the first point.
- Click again on the same point – with the CTRL key pressed, another notch was created facing the other side.
- Repeat this operation on all the necessary points. The angles will be calculated automatically.
1. The original piece
2. Seam was added
4. Auto Re-Seam is enabled, so notch was added on the Sew line and on the Cut line
5. Upper right box shows a Zoom of the notches area
