PDS:Stack Point
Use the Stack Point command to align all graded pieces to a reference point on either the X or Y axis. This command can also be applied to an internal point or button. The Grading software calculates the relative distance for each point and moves the grading of all the pieces accordingly. Patterns may be left as they are in their new position as you continue to grade. To return to the initial position, show the baseline and re-stack the grading to the baseline; or simply use Stack By Baseline.
Contents |
Icon & Location
- Menu: Grading> Stack> Stack Point
- Toolbar: General
- Grading Table
Operation
- Select a point.
- Invoke the Stack Point command.
- Select the axis according to which the point is to be stacked.
Common Usage Example
Restoring Stack Point Back To Original
You can perform this operation also by using Stack By Baseline, without the need to show and select the baseline.
Related INI Parameter
In SP 10.3 the default is NOT to grade the baseline after the Stack operation. If you still wish to apply grading to the baseline according to the stack point, use this ini parameter:
For SP 10.3
Add to Optitex10.ini - this Parameter will grade the baseline after stack operation
Section : [OptiTex PDS 10] Keyword : KeepGradingBaselineAfterStack Value : 1 or 0 (default = 0 = Do not grade baseline after stack )
|
|
