PDS:Reseam
From OptiTexHelpEn
Use the Reseam command to correct the seam according to the contour, but only if the piece is not automatically reseamed. You can disable the Auto-reseam function for all the pieces or only for a single piece.
Contents |
Location
- Menu: Tools> Seam > Reseam (F6)
Operation
- Select piece(s) with a seam allowance.
- Disable the Auto-reseam function for the selected pieces.
- Invoke the Reseam command. The seam is corrected according to the sew line.
1. Original piece
3. Contour is moved, but the seam is not updated, since the Automatic Reseam mode is disabled
4. Move a point
5. Again, the contour has changed, but the seem remains in place
6. After invoking the Reseam command, the seam is corrected
