PDS:Order Of Internal Objects

From OptiTexHelpEn

Use the Order Of Internal Objects command to change the order of the internal objects of a single piece. This command is used before Plotting or cutting the style. You can also perform Automatic Optimization through this command. In order to optimize several pieces at once, use the Optimize Internal Objects Sequence command.

Contents 1 Location 2 Operation 2.1 Common Usage Example 3 Dialog Explanation 3.1 Name 3.2 Type 3.3 Command 3.4 Cut and Plot Time 3.5 Tool/Layer 3.6 Set Number 3.7 First Order 3.8 Optimize 4 Related Subjects

[edit] Location

• Menu: Piece> General > Order Of Internal Objects

[edit] Operation

1. Select an internal object.
2. Invoke the Order Of Internal Objects command. The Change Order of Internals dialog box is displayed.
3. Change the order of the internal objects as required.
4. Click Set Number and then OK.

[edit] Common Usage Example

[edit] Dialog Explanation

[edit] Name

Shows the internal object's Name.

[edit] Type

Shows the type of the internal.

[edit] Command

Shows the Command of the internal.

[edit] Cut and Plot Time

Shows the Cut and Plot Time.

[edit] Tool/Layer

Shows the Tool/Layer.

[edit] Set Number

Sets the order according to the entered number.

[edit] First Order

[edit] Optimize

Optimizes the cutting sequence as follows:

1. Command in the following order:
   1. None
   2. Track
   3. Draw
   4. Drill
   5. Aux Drill
   6. Cut
2. Location of object - Objects with the same command will be ordered according to their location.

[edit] Related Subjects

• Optimize Internal Objects Sequence