PDS:Multiple Darts

Open fullness in multiply places over a selected contour, and adds a dart on a selected segment of the contour. The darts are opened in a clockwise direction.

Icon & location

• 
  
  
• PDS:Toolbar: Toolbox: Darts
• PDS:Menu: Tools> Darts> Multiple Darts...

Dialog explanation

Number of darts

Set the number of darts to be created on the selected segment. The segment is divided evenly according to the number of darts.

Number of darts =2

Set on first point

Set the first dart on the first selected point.

Set on first point

Set the first dart on the first selected point.

Equal for all sizes

Set the depth and width of the dart equal for all the sizes according to the base size. In this example 'Equal for all sizes' is

Disabled - The grading of the dart tip for each size is different

Enabled - The grading of the dart tip for each size is equal

Width

Set the first and last dart's width. All other darts between them will get a proportional width.

* First = 10cm
* Middle (automatically defined) = 5.5cm
* Last = 1cm

Depth

Set the first and last dart's depth. All other darts between them will get a proportional depth.

* First = 10cm
* Middle (automatically defined) = 5.5cm
* Last = 1cm

Angle

Set the first and last dart's angle from the contour. All other darts between them will get a proportional angle.

* First = 0 degrees (gives a result of 90 degrees from the contour)
Middle (automatically defined) = 67.5 degree
Last = 45 degrees

Related subjects

• Dart tool
• Dart properties
• Add fullness tool