PDS:Layers Table
Format
The import format that was defined in the Import to CAD file Dialog Box. Fields will change according to selected format.
Boundary Lines
The layer name/number to place piece boundary lines on.
Turn (Grade) Points
The layer name/number on which to place turn (grade) points.
Curve Points
Curve PointsThe layer name/number on which to place curve points.
Internal Lines (Draw)
The layer name/number on which to place internal lines. If internal lines are used and they are to be cut with an Automatic cutter, they should appear on the same layer as the outer perimeter. Otherwise, they will become internal elements with Draw attributes.
Internal Cut
The layer name/number on which to place internal cuts. If internal lines are used and they are to be cut with an Automatic cutter, they should appear on the same layer as the outer perimeter. Otherwise, they will become internal elements with Draw attributes.
Notches
The layer name/number on which to place notches.
In ASTM format you may set a different layers for different Notch Types.
- V Notches
- T Notches
- L Notches
- U Notches
- Box Notches
Drill Holes
The layer name/number on which to place drill holes (buttons with Drill command attribute).
Base (Grain) Lines
The layer name/number on which to place the Base line.
Sew Lines
The layer name/number on which to place sew lines (internal lines with Sew command attribute).
Quality Lines
The layer name/number on which to place Quality lines (internal lines with Quality command attribute).
Mirror Lines
Defines the layer name/number on which to place mirror lines
Grain (Grade) Lines
The layer name/number on which to place Grain lines.
Stripe Lines
The layer name/number on which to place Stripe lines (the horizontal lines).
Plaid Lines
The layer name/number on which to place Plaid lines (the vertical lines).
Validation Curves
Annotations
The layer name/number on which to place the Pieces Description
