PDS:Dart Properties
Contents |
Properties explanation
Main
Fix dart
If the dart has been moved, and is not correct, the 'Fix dart' button will appear.
Update Overlap Shape
Update the shape of the dart's 'cap' (overlap).
Depth
Set the distance between the dart tip and the center of the dart’s width.
Width
Set the distance between the first and the last point of the dart on the contour. If the width is set to 0 the dart will be closed.
Overlap
Set the behavior of the dart's 'cap'.
 None – The contour does not change |
 CW (Clockwise) - pink color for demonstration only |
 CCW (Counter Clockwise) |
Peculiar
Set the overlapping 'cap' of the dart shaped like the near segment.V11
 Peculiar OFF |
 Peculiar ON |
Name
Set the name of a dart. Show or hide the name in the View and Selection.
Location (X, Y)
Set the location of the dart tip from the 0, 0 point (according to the 'Ruler').
Equal for all Sizes
Set the depth and width of the dart equal for all the sizes according to the base size.
 Not equal |
 Equal |
Marker Attributes
Drill Distance
Set the distance of the dart's drill from the dart tip.
Drill Radius
Set the radius of the dart's drill.
Plot & Cut
Command
Tool/ Layer
Show/Plot/Cut Form
Set the Dart's notches as either I Notch form or T Notch form.V11
 I Notch Form |
 T Notch Form |
