PDS:Batch Commands

From OptiTexHelpEn

General Batch Format:

@<Command> [[/<Keyword>=<Value>] ...] [; <Commentary>]

Contents 1 Set ini File 2 End of Batch 3 Pause Batch 4 Working Unit 5 New 6 Open 7 Merge Files 8 Save 9 Import CAD 10 Export To CAD 11 Plot 12 Arrange 13 Print 14 Global Change 15 Display 16 Sizes 17 Grade 18 Transform 19 Clear 20 Create report 21 Rule Table 22 Point Cleanup 23 One Size 24 Move Point 25 Exit PDS 26 Exit & Delete 27 Add Text 28 Add Piece 29 Save With Change 30 Plot Hard Copy 31 Print Hard Copy 32 Load Size 33 Apply Rules 34 Rename Base Size 35 Close Rules Lib 36 Insert new size 37 Piece Properties 38 Correct by map 39 Assign Names To Grading Points 40 Create or Switch Variation 41 Stack Grading 42 Related Subjects

Set ini File

Add/Change value to OptiTex10.ini file

• Syntax: @SET
• Parameters
  1. /SECTION= or /SEC= Enter without brackets ([,])
  2. /KEYWORD= or /KEY=
  3. /VALUE= or /VAL=
• Example:

@SET /SECTION= /KEYWORD= /VALUE= 
; 

End of Batch

End of Batch-file performing.

• Syntax: @EOF or @!
• Parameters

No parameters

• Example:

@EOF 
; 

Pause Batch

Stop of Batch process. Use menu to continue

• Syntax: @PAUSE or @PAU
• Parameters
  1. /MSG= or /MSG= Must not content ',' and '>' symbols
• Example:

@PAUSE /MSG= 
; 

Working Unit

Set working units.

• Syntax: @UNIT or @UNI
• Parameters
  1. / Select Working Unit
     • CM - CM
     • MM - MM
     • INCHES or IN - Inches
• Example:

@UNIT /= CM MM INCHES 
;

New

Delete all pieces.

• Syntax: @NEW
• Parameters

No parameters

• Example:

@NEW 
; 

Open

Open dsn or cus file.

• Syntax: @OPEN or @OPE
• Parameters
  1. /CUS= or /CU= Open cus file.
     • YES - Yes
     • NO - No
  2. /FILE= or /FI=
• Example:

@OPEN /CUS= YES NO /FILE= 
; 

Merge Files

Merge dsn file.

• Syntax: @MERGE or @MER
• Parameters
  1. /FILE= or /FI=
  2. /SIZES= or /S=
     • CUR or C - Current (default)
     • MER or M - Merged
     • BOTH or B - Both
  3. /DELVAR= or /DV= Delete Variation grading sizes.
     • YES - Yes
     • NO - No
  4. /PREFIX= - add a prefix to piece name merged
• Example:

@MERGE /FILE= /SIZES= CUR MER BOTH /DELVAR= YES NO 
;

Save

Save PDS Style.

• Syntax: @SAVE or @SAV
• Parameters
  1. /FILE= or /FI= - Save as filename, not required when saving to the last opened filename.
  2. /CUS= or /CU= Save as CUS file.
     • YES - Yes
     • NO - No
  3. /XML= or /XM= Use XML-style header
     • YES - Yes
     • NO - No
  4. /SEP= Save all pieces in separate DSN/PDS files.
     • YES - Yes
     • NO - No
  5. /FORMAT= or /FO= File format to save
     • DSN8 - DSN ver 8
     • DSN9 - DSN ver 9
     • PDS - PDS ver 10
     • PDML - PDML ver 10
• Example:

@SAVE /FILE= /CUS= YES NO /XML= YES NO /SEP= YES NO /FORMAT= DSN8 DSN9 PDS  PDML 
;

Import CAD

Import one file.

• Syntax: @IMPORT or @IMP
• Parameters
  1. /FILE= or /FI=
  2. /FORMAT= or /FO=
     • DXF - DXF
     • AAMA - AAMA
     • ASTM - ASTM
     • IGES - IGES
     • CADL - CADL(CadKey)
     • DFT - DFT(cncKad)
     • GERB - GERB(Gerber Cutter)
     • HPGL - HPGL
     • DMPL - DMPL
     • MICROJET or MIC - MICROJET
  3. /XML= or /XM= Use XML-style header
     • YES - Yes
     • NO - No
  4. /UNIT= or /UNI= Units of imported file.
     • CM - CM
     • MM - MM
     • METER or ME - Meter
     • INCHES or IN - Inches
     • FEET or FE - Feet
     • YARD or YA - Yard
  5. /SIZES= or /SI= "Use Sizes" (as button in Import dialog)
     • YES - Yes
     • NO - No
  6. /GBUF= or /GB= Sets Buffer size
  7. /GDIR= or /GD= Rotation allows.
     • 0 - All enabled
     • 1 - None
     • 2 - PI
     • 4 - PI/2
  8. /GMIR= or /GM= Flip Allowance
     • 0 - None
     • 1 - X
     • 2 - Y
  9. /QUANTITY= or /QU=
  10. /SCALE= or /SC=
  11. /NN= or /NN= Using block number as piece name (Gerber Cutter only)
      • YES - Yes
      • NO - No
  12. /MATERIAL= or /MA=
  13. /NUMRULES= or /NR= Create numerical grade rule names or use

@ in name before number.

• 1. • YES - Yes
     • NO - No
  2. /BOX= or /BO= Import in Box mode
     • YES - Yes
     • NO - No
• Example:

@IMPORT /FILE= /FORMAT= DXF AAMA ASTM IGES CADL DFT GERB HPGL DMPL MICROJET /XML= YES NO /UNIT= CM MM METER INCHES FEET YARD /SIZES= YES NO /GBUF= /GDIR= 0 1 2 4 /GMIR= 0 1 2 /QUANTITY= /SCALE= /NN= YES NO /MATERIAL= /NUMRULES= YES NO /BOX= YES NO 
; 

Export To CAD

Export to a CAD/CAM Format

• Syntax: @EXPORT or @EXP
• Parameters
  1. /FILE= or /FI=
  2. /FORMAT= or /FO= Format of imported file.
     • DXF - DXF
     • AAMA - AAMA
     • ASTM - ASTM
     • CADL - CADL
     • IGES - IGES
     • XML - XML
     • HUMNANTEC - Humnantec
  3. /XSC= or /X= X - Scale.
  4. /YSC= or /Y= Y - Scale.
  5. /NSPLINE= or /NS= Using splines and polylines
     • YES - Yes
     • NO - No
  6. /SPST= or /SP= Step for spline line
  7. /NARC= or /NA= Using arcs
     • YES - Yes
     • NO - No
  8. /ARCBULGE= or /ARCB= Bulge for arc lines
  9. /ARCNUM= or /ARCN= Max no.of lines for arc
• Example:

@EXPORT /FILE= /FORMAT= DXF AAMA ASTM CADL IGES XML HUMNANTEC /XSC= /YSC= /NSPLINE= YES NO /SPST= /NARC= YES NO /ARCBULGE= /ARCNUM= 
; 

Plot

Plot Working area

• Syntax: @PLOTTER or @PLO
• Parameters
  1. /FILE= or /FI=
  2. /FORMAT= or /FO=
     • DMPL - DMPL
     • CYBCUT - Cybrid Cutter/Plotter
     • CYBPL - Cybrid Plotter
     • IOLS - IOLS
     • HPGL - HPGL
     • HP2 - HPGL/2
     • HPTEC - HPGL PlotTec
     • HPGEN - HPGL Generic
     • ARISTO - Aristomat Cutter
     • ZUND - Zund (PN, LC) Cutter
     • IEA - IEA
     • WILD - Wild Cutter/Plotter
     • WLDPL - Wild Plotter
     • EAST - Eastman Cutter
     • APGL - Gerber Plotter
     • AP700 - AP 700 PLOTTER
     • MICRO - MicroJet Plotter
     • GERBER - Gerber Cutter
     • EDGE - Cutting Edge
     • TAKA - Takaoka Cutter
     • LECTRA - Lectra Flat Bed Plotter
     • LECFP - Lectra FlyPen
     • MUTOH - Mutoh
     • GERBCP - Gerber Cutter for Plotter
     • OPTIJET - OptiJet Printer/Plotter
  3. /XSC= or /X= X - Scale.
  4. /YSC= or /Y= Y - Scale.
  5. /PGX= or /PGX=
  6. /PGY= or /PGY=
  7. /SPST= or /SP= Step for spline line
  8. /ARCBULGE= or /ARCB= Bulge for arc lines
  9. /FONTFILE= or /FONT=
  10. /FONTSIZE= or /FSIZE= Font Size.
  11. /BIF= or /BIF= Using built-in font for plotter
      • YES - Yes
      • NO - No
  12. /PENNUM= or /PEN=
  13. /MINLINE= or /MIN= min line length for plotter
  14. /GAP= or /GAP= Gap after plotting length
  15. /ONEPAGE= or /ONEP= Plot all draft on one page only
      • YES - Yes
      • NO - No
  16. /CEN0= or /CEN0= (0, 0) of Plotter in center of Page
      • YES - Yes
      • NO - No
  17. /MANFF= or /MAN= Using manual Page Advance
      • YES - Yes
      • NO - No
  18. /OVERLAP= or /OVER= Using continues / overlapping pages
      • YES - Yes
      • NO - No
  19. /AUTOMOTION= or /AUTO= Order by tools (all internals on Marker first)
      • YES - Yes
      • NO - No
  20. /OPT= or /OPT= Prepare Moving Optimization (Calculate Shared Lines)
      • YES or Y - Yes
      • NO or N - No
      • SHARED or S - Shared
  21. /OUTMAN= or /OUTM=
      • YES - Yes
      • NO - No
  22. /COPIES= or /COP= No.of copies for Output Manager
  23. /ALSTART= or /ALS= Alert on Start in Output Manager
      • YES - Yes
      • NO - No
  24. /ALEND= or /ALE= Alert on End in Output Manager
      • YES - Yes
      • NO - No
  25. /RMEND= or /RME= Remove file on End in Output Manager
      • YES - Yes
      • NO - No
  26. /NETWORK= or /NET=
      • YES - Yes
      • NO - No
  27. /STATUS= or /STAT=
      • YES - Yes
      • NO - No
  28. /CRLF= or /CR=
      • YES - Yes
      • NO - No
  29. /USEOCC= or /USE= Use OCC manage
      • YES - Yes
      • NO - No
  30. /BITE= or /BT=
      • YES - Yes
      • NO - No
  31. /LASTFA= or /LAST= Frame Advance after last frame
      • YES - Yes
      • NO - No
  32. /WHOLEPIECES= or /WHOLE= Plot/Cut Piece in One Frame
      • YES - Yes
      • NO - No
  33. /COLORS= or /COL=
      • YES - Yes
      • NO - No
  34. /OPTCUTORDER= or /OPTC= Optimize Plot/Cut Order
      • YES - Yes
      • NO - No
  35. /PLOTHEADERSTATUS= or /PLOTHS= Plot Header
      • YES - Yes
      • NO - No
  36. /PLOTBUMPLINES= or /PLOTBL= Plot Bump Lines
      • YES - Yes
      • NO - No
  37. /PLOTSPLICES= or /PLOTS= Plot Splicing Marks
      • YES - Yes
      • NO - No
  38. /PLOTRULERS= or /PLOTR=
      • YES - Yes
      • NO - No
  39. /PLOTSTRIPES= or /PLOTST= Plot Stripe & Plaid Lines
      • YES - Yes
      • NO - No
  40. /M70= or /M70= Use initialization in the header
      • YES - Yes
      • NO - No
  41. /OFFSET= or /OFF=
  42. /YOFFSET= or /YOFF=
  43. /USEHEAD= or /USEH=
      • YES - Yes
      • NO - No
  44. /HEADER= or /HEAD= If Use File Header ,set the header
  45. /USEFOOT= or /USEF=
      • YES - Yes
      • NO - No
  46. /FOOTER= or /FOOT=
  47. /SEAM= or /SE= Contour type to import
      • INT or I - Internal
      • EXT or E - External
      • CUT or C - Cut Contour
      • SEW or S - Sew Contour
      • BOTH or B - Both Contours
  48. /RULES= or /RUL=
      • YES - Yes
      • NO - No
  49. /EGAP= or /EG= External gap by X ( default = 0.0 ).
• Example:

@PLOTTER /FILE= /FORMAT= DMPL CYBCUT CYBPL IOLS HPGL HP2 HPTEC HPGEN ARISTO ZUND IEA WILD WLDPL EAST APGL AP700 MICRO GERBER EDGE TAKA LECTRA LECFP MUTOH GERBCP OPTIJET /XSC= /YSC= /PGX= /PGY= /SPST= /ARCBULGE= /FONTFILE= /FONTSIZE= /BIF= YES NO /PENNUM= /MINLINE= /GAP= /ONEPAGE= YES NO /CEN0= YES NO /MANFF= YES NO /OVERLAP= YES NO /AUTOMOTION= YES NO /OPT= YES NO SHARED /OUTMAN= YES NO /COPIES= /ALSTART= YES NO /ALEND= YES NO /RMEND= YES NO /NETWORK= YES NO /STATUS= YES NO /CRLF= YES NO /USEOCC= YES NO /BITE= YES NO /LASTFA= YES NO /WHOLEPIECES= YES NO /COLORS= YES NO /OPTCUTORDER= YES NO /PLOTHEADERSTATUS= YES NO /PLOTBUMPLINES= YES NO /PLOTSPLICES= YES NO /PLOTRULERS= YES NO /PLOTSTRIPES= YES NO /M70= YES NO /OFFSET= /YOFFSET= /USEHEAD= YES NO /HEADER= /USEFOOT= YES NO /FOOTER= /SEAM= INT EXT CUT SEW BOTH /RULES= YES NO /EGAP= 
; 

Arrange

Arrange to Plotter.

• Syntax: @ARRANGE or @ARR
• Parameters
  1. /SCATTER= or /S= Scatter pieces ( and not use pieces with quantity=0 ).
     • YES - Yes
     • NO - No
  2. /OPEN= or /O=
     • YES - Yes
     • NO - No
  3. /ROT= or /R= Rotate long pieces or not ( by default - YES ).
     • YES - Yes
     • NO - No
  4. /WIDTH= or /W=
  5. /GAP= or /G=
  6. /LENGTH= or /L= Plotter frame length.
  7. /EGAP= or /EG= External gap by X ( default = 0.0 ).
• Example:

@ARRANGE /SCATTER= YES NO /OPEN= YES NO /ROT= YES NO /WIDTH= /GAP= /LENGTH= /EGAP= 
; 

Print

Print on default printer.

• Syntax: @PRINT or @PRI
• Parameters
  1. /SCALE= or /SC= Print with scale.
  2. /PAGE= or /PG=
     • YES - Yes
     • NO - No
• Example:

@PRINT /SCALE= /PAGE= YES NO 
; 

Global Change

Set global pieces parameters.

• Syntax: @GLOBAL or @GLO
• Parameters
  1. /NAME= or /NA= If there is more then one piece in style file - first parameter is a key.
  2. /STYLE= or /ST= Set Style Name.
  3. /CODE= or /CO=
  4. /NTYPE= or /NT=
     • T - T Notch
     • V - V Notch
     • I - I Notch
     • L - L Notch
     • U - U Notch
     • P - Box
  5. /NMODE= or /NM=
     • DRAW or D - Draw
     • CUT or C - Cut
     • PUNCH or P - Punch
  6. /CTIME= or /CT=
     • BEFORE or B - Before contour
     • INTIME or I - Together
     • AFTER or A - After Contour
  7. /NDEPTH= or /ND=
  8. /NWIDTH= or /NW=
  9. /BDIAM= or /BD=
  10. /PMODE= or /PM=
      • DRAW or D - Draw
      • CUT or C - Cut
      • DRILL or DR - Drill
      • ADRILL or ADR - Aux.Drill
  11. /SIDE= or /SI= Opposite piece and Orientation properties
      • LEFT or L - Left
      • RIGHT or R - Right
      • XFLIP or X - Up/Down
      • YFLIP or Y - Right/Left
      • LX - Left + Up/Down
      • LY - Left + Right/Left
      • RX - Right + Up/Down
      • RY - Right + Right/Left
  12. /GBUF= or /GB= Sets Buffer size
  13. /GDIR= or /GD= Rotation allows.
      • 0 - All enabled
      • 1 - None
      • 2 - PI
      • 4 - PI/2
  14. /GMIR= or /GM= Flip Allowance
      • 0 - None
      • 1 - X
      • 2 - Y
  15. /QUANTITY= or /QU=
  16. /MATERIAL= or /MA=
  17. /TOOL= or /TO= Tool/Layer name for pieces external contour
  18. /ITOOL= or /IT= Tool/Layer name for internal contours
  19. /DS or /DESCRIPTION = Piece Description
  20. /QL or /QUALITY= Quality
• Example:

@GLOBAL /NAME= /STYLE= /CODE= /NTYPE= T V I L U P /NMODE= DRAW CUT PUNCH /CTIME= BEFORE INTIME AFTER /NDEPTH= /NWIDTH= /BDIAM= /PMODE= DRAW CUT DRILL ADRILL /SIDE= LEFT RIGHT XFLIP YFLIP LX LY RX RY /GBUF= /GDIR= 0 1 2 4 /GMIR= 0 1 2 /QUANTITY= /MATERIAL= /TOOL= /ITOOL= 
;

Display

Control of display objects.

• Syntax: @DISPLAY or @DIS
• Parameters
  1. /POINT= or /PNT= Show ( or not ) non-grade points.
     • YES - Yes
     • NO - No
  2. /PNTNUM= Show ( or not ) point numbers.
     • YES - Yes
     • NO - No
  3. /TEXT= or /TX= Show ( or not ) text.
     • YES - Yes
     • NO - No
  4. /CONTOUR= or /CN= Show ( or not ) contours.
     • YES - Yes
     • NO - No
  5. /CIRCLE= or /CR= Show ( or not ) circles.
     • YES - Yes
     • NO - No
  6. /BUTTON= or /BT= View Button
     • YES - Yes
     • NO - No
  7. /BASELINE= or /BA= or /BS= View Base Line
     • YES - Yes
     • NO - No
  8. /NOTCH= or /NO= View Notches
     • YES - Yes
     • NO - No
  9. /DART= or /DT= Show ( or not ) darts.
     • YES - Yes
     • NO - No
  10. /PLEAT= or /PL= Show ( or not ) pleats ( axes ).
      • YES - Yes
      • NO - No
  11. /LINES= or /LN= Show ( or not ) darts and pleats ( axes ) in line form.
      • YES - Yes
      • NO - No
  12. /DRAW= or /DR= View Internals DRAW, SEW and QUALITY
      • YES - Yes
      • NO - No
  13. /CUT= or /CU= View Internals CUT
      • YES - Yes
      • NO - No
  14. /PUNCH= or /PU= Show ( or not ) objects PUNCH mode.
      • YES - Yes
      • NO - No
  15. /DRILL= or /DR= View Internals DRILL and AUXDRILL
      • YES - Yes
      • NO - No
  16. /AUXDRILL= or /AUX= Show ( or not ) objects AUXDRILL mode.
      • YES - Yes
      • NO - No
  17. /SEW= Show ( or not ) objects SEW mode.
      • YES - Yes
      • NO - No
  18. /QUALITY= or /QUA= Show ( or not ) objects QUALITY mode.
      • YES - Yes
      • NO - No
  19. /NONE= or /NO= Show ( or not ) objects NONE mode.
      • YES - Yes
      • NO - No
  20. /TILT= or /TI= View Placed Piece Tilt Value
      • YES - Yes
      • NO - No
  21. /GRPNT= Show ( or not ) grade points.
      • YES - Yes
      • NO - No
• Example:

@DISPLAY /POINT= YES NO /PNTNUM= YES NO /TEXT= YES NO /CONTOUR= YES NO /CIRCLE= YES NO /BUTTON= YES NO /BASELINE= YES NO /NOTCH= YES NO /DART= YES NO /PLEAT= YES NO /LINES= YES NO /DRAW= YES NO /CUT= YES NO /PUNCH= YES NO /DRILL= YES NO /AUXDRILL= YES NO /SEW= YES NO /QUALITY= YES NO /NONE= YES NO /TILT= YES NO /GRPNT= YES NO 
;

Sizes

Control of display sizes.

• Syntax: @SIZES or @SI
• Parameters
  1. /ALL= or /A= Show all sizes.
     • YES - Yes
     • NO - No
  2. /BASE= or /B= Show base size only.
     • YES - Yes
     • NO - No
  3. /ON= Show this size.
  4. /OFF= or /OF= don't show this size.
• Example:

@SIZES /ALL= YES NO /BASE= YES NO /ON= /OFF= 
;

Grade

Set grading of one ( by name ) or some ( by prefix ) pieces on one (non-base) size by base size of another piece ( by size prefix - pieces ) correspondingly.

• Syntax: @GRADE or @SETGRADING
• Parameters
  1. /PIECE= or /PIE= - Piece name who changes grading
  2. /SZPIECE= or /SZPIE= - Piece name for source of grading
  3. /SIZE= or /SZ= - non-base size for change grading
• Example:

@GRADE /PIE=PIECE1 /SZPIE=PIECE2 /SZ=XS

Transform

Transformation of pieces. Order of operation : Rotation, Flip, Scale.

• Syntax: @TRANSFORM or @TR
• Parameters
  1. /NAME= or /NA= Pieces with this name only.
  2. /ROTATE= or /RO= Angle in degrees
  3. /FLIP= or /FL= Flip vertical [ after Rotation ].
     • YES - Yes
     • NO - No
  4. /XSCALE= or /XS= Horizontal Scale factor
  5. /YSCALE= or /YS=
• Example:

@TRANSFORM /NAME= /ROTATE= /FLIP= YES NO /XSCALE= /YSCALE= 
; 

Clear

Remove all pieces from the table ( but not delete ).

• Syntax: @CLEAR or @CL
• Parameters

No parameters

• Example:

@CLEAR 
; 

Create report

Create a Report in Excel format.

• Syntax: @REPORT or @REP
• Parameters
  1. /FILE= or /FI=
• Example:

@REPORT /FILE= 
; 

Rule Table

Import Rule Table (ANSI/AAMA or ASTM format).

• Syntax: @RULETABLE or @RULES
• Parameters
  1. /FILE= or /FI=
  2. /FM= or /FM= File Format, by default - format auto recognition
     • IMPORT or IMP - Import (AAMA)
     • PDS - PDS (OptiTex)
• Example:

@RULETABLE /FILE= /FM= IMPORT PDS 
; 

Point Cleanup

Clean Up all pieces ( delete same points without change form ).

• Syntax: @POINTCLEANUP or @PINTCL
• Parameters
  1. /TOL= or /T=
  2. /MINLINE= or /ML=
  3. /DGR= Delete non-grade points only or all kinds of points.
     • YES - Yes
     • NO - No
  4. /INTERN= or /IN= Clean Up internal contours too ( or not ).
     • YES - Yes
     • NO - No
• Example:

@POINTCLEANUP /TOL= /MINLINE= /DGR= YES NO /INTERN= YES NO 
; 

One Size

• Syntax: @ONESIZE or @ONE
• Parameters
  1. /SIZE= or /SZ= Delete all sizes except this size ( by default except base size ).
• Example:

@ONESIZE /SIZE= 
; 

Move Point

Move point or same points by name.

• Syntax: @MOVEPNT or @MTM
• Parameters
  1. /PNT= move all points with this name.
  2. /DX= Move distance.
  3. /DY= Move distance.
  4. /LSPNT= For move by (dx, dy) all points between pnt and lspnt.
  5. /FRSFIX= For proportional move all points between frsfix and pnt.
  6. /LSFIX= For proportional move all points between pnt ( or lspnt ) and lsfix.
• Example:

@MOVEPNT /PNT= /DX= /DY= /LSPNT= /FRSFIX= /LSFIX= 
; 

Exit PDS

Close PDS.

• Syntax: @EXIT or @EX
• Parameters

No parameters

• Example:

@EXIT 
; 

Exit & Delete

Exit and delete batch file.

• Syntax: @XEXIT
• Parameters

No parameters

• Example:

@XEXIT 
; 

Add Text

Add text to one of the hardcopy sections.

• Syntax: @HCLINE
• Parameters
  1. /BLOCK= or /BLO= Select block to add text.
  2. /FONT= or /FON= Font Size.
     • HALF or H - Half
     • DOUBLE or D - Double
  3. /CLEAR= or /CL= Clears marker before import
     • YES - Yes
     • NO - No
  4. /TEXT= or /T=
• Example:

@HCLINE /BLOCK= /FONT= HALF DOUBLE /CLEAR= YES NO /TEXT= 
; 

Add Piece

Add piece to hardcopy

• Syntax: @HCPIECE
• Parameters
  1. /NM=
  2. /FL=
• Example:

@HCPIECE /NM= /FL= 
; 

Save With Change

Save dsn file with text change.

• Syntax: @HCUPDATE
• Parameters
  1. /NM=
  2. /FL=
• Example:

@HCUPDATE /NM= /FL= 
; 

Plot Hard Copy

• Syntax: @HARDCOPY
• Parameters

No parameters

• Example:

@HARDCOPY 
; 

Print Hard Copy

• Syntax: @PRINTHARDCOPY
• Parameters

No parameters

• Example:

@PRINTHARDCOPY 
; 

Load Size

Load sizes from active grade rule (V10 only)

• Syntax: @LOADSIZES or @LDSZS
• Parameters
  1. /SIZE= or /SZ= Size to load or new size name
• Example:

@LOADSIZES /SIZE= 
; 

Apply Rules

Apply all rules of active grade rules library to all points with a matching rule name. (V10 only)

• Syntax: @APPLYRULESBYNAMES or @APPLYRULES
• Parameters
  1. /SIZE= or /SZ= Size to load or new size name
• Example:

@APPLYRULESBYNAMES /SIZE= 
; 

Rename Base Size

Rename the base size name Load sizes from active grade rule (V10 only)

• Syntax: @RENAMEBASESIZE or @RENMBS
• Parameters
  1. /SIZE= or /SZ= or /NM= New base size name
• Example:

@RENAMEBASESIZE /SIZE= 
; 

Close Rules Lib

Close Grading Rules Library (v10 only)

• Syntax: @CLOSERULELIBRARY or @CLSRL
• Parameters

No parameters

• Example:

@CLOSERULELIBRARY 
; 

Insert new size

Insert new size between two existing sizes in ratio. (V10 only)

• Syntax: @INSERTMIDDLESIZE or @INSMIDSZ
• Parameters
  1. /FROMSIZE= or /FRSZ= Name of existing size - by default /FROMSIZE=BASE
  2. /NEWSIZE= or /SZ= Name for new size
  3. /RATIO= or /RT= Ratio - ratio must be > -1.0 and < 1.0. By default /RT=0.5
• Example:

@INSERTMIDDLESIZE /FROMSIZE= /NEWSIZE= /RATIO= 
; 

Piece Properties

Change the piece properties, one unique ID or piece name must be defined (v10 only)

• Syntax: @CHANGEPIECEPROP or @PIECEPROP or @PIEPR
• Parameters
  1. /UNIQUE= or /UNI= Unique ID can be found in PDS piece properties
  2. /PIECE= or /PIE= Target piece name to change
  3. /NAME= or /6008=
  4. /CODE= or /CD=
  5. /DESCRIPTION= or /DS= or /DESC=
  6. /QUANTITY= or /QN= or /QUAN=
  7. /MATERIAL= or /MT= or /MAT=
  8. /QUALITY= or /QA= or /QUA=
• Example:

@CHANGEPIECEPROP /UNIQUE= /PIECE= /NAME= /CODE= /DESCRIPTION= /QUANTITY= /MATERIAL= /QUALITY= 
; 

Correct by map

Will correct all pieces by map

• Syntax: @CORRECTPIECESBYMAP
• Parameters

No parameters

• Example:

@CORRECTPIECESBYMAP 
;

Assign Names To Grading Points

Assign names to grading points of contour

• Syntax: @ASSIGNPOINTNAMES or @ASSPNTNMS
• Parameters
  1. /PIE[CE]=<peces> - piece
  2. [/CNT=<internal contour name>] - by default - external contour
  3. [/PRF=<prefix for name] - by default - empty
  4. [/SUF=<suffix for name] - by default - empty
  5. [/ST[ART]=<start number>] - by default 1.
  6. [/OV[ER]] - overwrite existing names. by default - not overwrite
• Example:

@ASSIGNPOINTNAMES

Create or Switch Variation

Switch to existing variation with this name or create new Size Variation

• Syntax: @SizeVariation
• Parameters
  1. /NAME=<variation Name> - variation Name

Stack Grading

Stack grading of a piece to a certain point or along line.

• Syntax:@STACKGRADING or @STACKGR
• Parameters
  1. /PIECE=<piece name> - piece for Stack. If the piece name is not defined all pieces will be used by default.
  2. /PNT=<point name> - point for Stack Point or first point for Stack Along Line. If this point is not defined then it will Stack By Baseline.
  3. /PNT2=<point name> - second point for Stack Along Line.
  4. /BY=X|Y|ALL - for Stack Point by X or by Y only.By default 'ALL'.
• Example: @STACKGRADING

Related Subjects

• How To Launch A Batch File
• Marker Batch Commands
• Batch Creator