PDS:Add Slit Along Segment
Use this command to add several different objects (such as buttons) to a curved segment with defined size and defined distance. (to divide a segment in defined number)
Contents |
Location
Menu: Design> Add> Add Slit Along Segment
Dialog Explanation
Length Of Segment For Slit
Indicates the length of the selected segment.
Type Of Slit
Sets the type of object to be added.
Points On Curve
Automatically adds curve points on the curved segment. This is similar to Add Spline Support Points.
Number
Sets the number of objects to be added. To enter the maximum number set (according to current distance), enter 0 and then click OK.
Distance
Sets the distance from the first point to the first object, and from each object to the others. The distance is calculated along the segment.
By Equal Distance
The system automatically calculates the distance and divides it equally.
Skip Darts
Excludes the dart's 'cap' (overlap) from the distance calculations.
Direction
Sets the direction of the objects to be added – clockwise, or counter-clockwise.
Length/ Radius
Sets the Length or Radius of the object, depending on its type.
Angle
Sets the angle of a line or 'I' notch.
Start Point
When the object type is 'Line' - sets the starting point. See the internal contour numbers through View & Selection.
