Marker:Snap to Axis after Rotation

When the command is activated, the piece will snap to the nearest 90 degree angle (within a range of 8 degree from the initial position). The command acts as an on/off toggle switch to control the manual rotation value of a piece when using the manual nesting.

Icon & Location

• Menu: Options> Snap to Axis after Rotation.

Operation

1. Click on the Snap to Axis after Rotation command.
2. Rotate a piece by using the Rotate Around Center Tool or the Rotate Piece Tool
3. Note that the piece snap to 90 or 180 Deg.

Related Subjects

• Rotate
• Rotate 90 Deg
• Rotate 180 Deg
• Rotate Around Center Tool
• Rotate Piece Tool