Hardware:Network License Activation
From OptiTexHelpEn
When working with a network license, the activation of the key is done using the OptiTex License Manager.
- Current version
- Older version
- Read more
- In order for this to work, it must be run from the computer where the key is connected.
Contents |
Activation Procedure
Plug Version
- Access the Server computer (the one with the Network key plugged), Don't use remote desktop applications but a direct access only.
- Download the License Manager from this page (link on the right).
- Open the License Manager, make sure you see your key number (and not zero) on the top, otherwise check Network Key Problems.
- Click on Change Plug Version
- Select the version number from the box (typically 10).
- Type the activation codes (if you don't know them contact your local dealer).
- Click OK, a confirmation box should appear.
- Activation Complete, You should see the version number on top of the window.
Check Key number, Press Change Plug Version
Type in activation codes
Module Codes
- To add and activate modules: Double click on each module and enter its codes. Click OK.
License ID
| No. | Program name |
|---|---|
| 1 | Marker |
| 2 | PDS |
| 3 | Modulate |
| 4 | Converters |
| 5 | Creator (3D) |
| 6 | Nest++ |
| 7 | License Manager |
Troubleshooting
- When trying to add a regular module (not to change the version), If the codes are not saved after adding the code, then try to plug the key on a other computer.
NetHASP License Manager
- NetHasp License Manager has to be installed on the key server in order for the network plug to work.
- Make sure OptiTex USB key is plugged to your computer.
- Current version
- Older version
- No older versions available
- Read more
- Download and unzip the file, then run the installation file.
