Hardware:Lectra Calcomp Digitizer
From OptiTexHelpEn
Contents |
How to find your model number
- Lectra has different OEM Calcomp digitizers, to find your model number look on the back of the digitizer for the silver plate, the number is compose of 5 digits, first one is the Drawboard model, last 4 are the size. Ex :34480, is Calcomp Drawboard 3 44X80 inch.
Lectra Caclomp (34480) digitizer Settings
- Select Calcomp 34480 (Lectra) driver in the digitizer setup dialog box and then use the default setting for this driver.
- Bits per second: 9600
- Data bits: 7
- Parity: None
- Stop bits: 2
- Flow control: None
Troubleshooting
Crazy lines are created when digitizing
- Solution : Disconnect the digitizer from the power for 3-5 minute then reconnect and try again.
No response from digitizer
- Solution 1 : check that the serial cable is plugged on both computer and digitizer, and the digitizer is turnned on.
- Solution 2 : Check that the COM port is defined in the windows hardware device.
- Solution 3 : If the digitizer mouse is wireless, check the batteries.
- Solution 4 : Make sure no external driver is installed.
digitizing result isn't scaled correctly (1.6 percent different )
Solution
Add to Optitex10.ini a new parameter this Parameter will define the working unit for the digitizer
Section : [OptiTex PDS] Keyword : LectraDigiEngUnits Value : 1 or 0 (default = 0 = Use metric )
|
|
