Hardware:Investronica DIAMOND250

From OptiTexHelpEn

Plotter Cutter Format Setup


X (Length): 1800mm (70.866 inch)	One Frame Only: unchecked
Y (Width): 1500-2000mm (59.055-78.74 inch)	Frame Advance After Last Frame: unchecked
Y Offset: Optional	Plot/Cut Piece in One Frame: checked
Gap After Plotting: Optional	Order According Tools: checked
Minimal Plot/Cut Line: .008	Pens (Tools) According to Sizes: unchecked
Bulge (Chord Error): 0.0079Inch or 0.02cm	Plot Continuous: checked
Overcut Length: Optional
Splicing Marker Origin And Size : Optional


M19_For_Slit_Notch: unchecked	(0,0) in Frame Center: unchecked
M19 for Non-Slit Notch: unchecked	Manual Frame Advance: unchecked
Use Inch Unit: unchecked	Use CR/LF in Code: unchecked
Cut Darts: unchecked	Use Initialization in File Header (<M70>/<IN>...): checked
No Draw: checked	Use Byte Offset: checked -> -.50
File Header: unchecked	File Footer: unchecked
Use Built-in Font: unchecked